New style PE carbon spiral duct tube extrusion line / extruder
Features of production line:
1. Dedicated single-screw extruder is especially used for producing
polyolefin products, and the specialized separating type
mix-melting screw possesses features of high-speed extrusion and
2. The pipe die head is designed in standard, and the reasonable
flowing path ensures smoothness of the inside and outside walls of
the pipe. The way of assembling the die head is designed according
to the client’s requirement, which saves much room.
3. Both scientifically designed copper spiral sizing sheath and the
powerful inhaling vacuum device contribute to high extrusion of the
4. The tank is made of stainless steel, and automatic controller is
used to control the liquid level. The peculiar spraying nozzle
brings about effective cooling and the motor ensures longitudinal
movement and three-dimensional adjustment in terms of the
directions of upward, downward, left and right.
5. The special sizing and cooling mode enable the production line
to produce pipes whose diameter range is from 25mm to 200mm, at a
speed of 0.8to 1.5 meters per minute.
6.Stainless steel cooling water trough is three-dimensional
regulation,longitudinal moved by motor.
7.High efficient cooling comes from peculiar spraying nozzle and
high efficiency water pump.
1. Automatic Feeder 2. Hopper Dryer 3. Single-screw extruder 4.
Mould 5. Vacuum Calibration Tank 6. Spray Box 7. Haul-off Machine
8. Cutting 9. Stacker
The Main Parameters of the machine:
|Production speed (m/min)||0.8-1.5||0.8-1.5|